Gateway » NV SERIES » NV-53

Gateway » NV SERIES » NV-53 LCD Screen Replacement Guide

How to Remove Replace Install your Gateway NV SERIES NV-53 Laptop LCD Screen

1. Remove the rubber covers from you Gateway NV-53 LCD Screen.

2. Use a philips head screw driver to remove the screws.

3. Pry off the Gateway NV-53 Plastic LCD bezel.

4. Remove the screws from the side of the LCD hinges.

5. Handle the Gateway NV-53 LCD hinges with care as they are delicate.

6. Place the Gateway NV-53 LCD Screen down on its front and remove the LCD ribbon cable from the LCD.

7. Unplug and remove the Gateway NV-53 Inverter from the LCD.

8. You are now ready to replace and install your new Gateway NV-53 LCD Screen.

9. Recconnect back your Gateway NV-53 Inverter LCD Cable and Hinges.

10. Place the screws back in and secure the Plastic LCD Bezel back in place.